Multimodal testing system for flexible electronics (materials and devices) in high and low temperature environments

Product Name: Multimodal Testing System for Flexible Electronics (Materials and Devices) in High and Low Temperature Environments

Product model: ST600C+

Types of test samples: flexible electronic materials and devices, single fibers, yarns, textiles, film materials, gels, smart textiles, conductive films, conductive fibers, conductive yarns, artificial skin, etc.

This device is used to test the comprehensive physical properties of flexible electronic materials under high and low temperature environments. It can simultaneously collect data on elongation, force value, and resistance. It offers multiple measurement modes, such as repeated stretching, unidirectional stretching, repeated torsion, unidirectional torsion, repeated bending, unidirectional bending, repeated displacement testing, repeated force value testing, folding fatigue testing, step force value testing, step displacement testing, and time response testing.

The instrument is introduced as follows:

1. Equipped with an insulating clamp (clamp width 25mm), used for holding materials with high tensile strength;

2. Equipped with linear motion module and rotary motion module;

3. Equipped with resistance measuring electrodes, facilitating connection with static electrical testing modules;

4. The spacing of the fixture is adjustable, suitable for samples of different sizes;

5. Stretching stroke: 200mm;

6. Stretching displacement resolution: 400 nanometers;

7. Stretching speed range: 0.01-500mm/min, continuously adjustable;

8. Maximum vibration frequency: 8Hz;

9. Maximum force: 8kg and 20kg are optional;

10. Resolution of force value: For a measuring range of 8kg, the resolution is one in four hundred thousand of the measuring range, with a minimum resolvable force value of 0.02g; for a measuring range of 20kg, the resolution is one in two hundred thousand of the measuring range, with a minimum resolvable force value of 0.1g;

11. Torsion speed range: 0.1-10 rotations per minute, with continuously adjustable torsion speed;

12. Resistance test range: 0.01Ω-200MΩ;

13. Resistance resolution: 0.01Ω;

14. Maximum data acquisition frequency: 100Hz;

15. Host structure: It adopts a horizontal structure, facilitating sample loading;

16. Host volume: approximately 700mm*450mm*400mm;

17. Power supply voltage: 220V 50Hz;

18. Equipped with multifunctional software for controlling instruments and collecting data, it can simultaneously collect displacement, force value, and resistance data, and generate spectrograms; it can be set to various measurement modes, such as repeated stretching, unidirectional stretching, repeated twisting, unidirectional twisting, repeated bending, unidirectional bending, repeated folding, rotational friction, time response, force value stepping, displacement stepping, etc;

19. Equipped with a pressure plate for testing repeated compression, rotational friction, etc. of film materials;

20. Equipped with a folding module for testing the repeated folding performance of flexible materials;

21. The software can synchronously collect data from multiple brands of meters, such as Keithley SourceMeter 2400, 2450, Lianxun SourceMeter S3012H, and Tonghui LCR Meter TH2840, and can simultaneously collect data on resistance, capacitance, inductance, and other parameters

22. It can control temperature in situ, testing the physical properties of materials under high and low temperature environments

1) Dimensions of the temperature control box: approximately 850mm (width) * 870mm (depth) * 1500mm (height), with dimensions subject to adjustment based on the specific installation method.

2) Temperature range: -50℃~+120℃

3) Maximum heating rate: 3℃/min

4) Maximum rate of temperature decrease: -1℃/min

5) Programmable temperature control, setting of heating and cooling rates, etc

23. Applicable testing standard: FZ/T 50065-2025 (Test method for resistance-stretch sensitivity coefficient of conductive filament in chemical fiber)