Multimodal Testing System for Flexible Electronics (Materials and Devices)

Product Name: Multimodal Testing System for Flexible Electronics (Materials and Devices)

Product Model: ST600C

Types of test samples: flexible electronic materials and devices, single fibers, yarns, textiles, membrane materials, gels, smart textiles, conductive films, conductive fibers, conductive yarns, artificial skin, etc.

This equipment is used to test the comprehensive physical properties of flexible electronic materials. It can simultaneously collect elongation, force, and resistance data, and features multiple measurement modes: such as cyclic stretching, unidirectional stretching, cyclic twisting, unidirectional twisting, cyclic bending, unidirectional bending, cyclic displacement testing, cyclic force testing, folding fatigue testing, step force testing, step displacement testing, time response testing, etc.

The instrument is introduced as follows:

1. Equipped with an insulating clamp (available width 25mm) for holding materials with high strength;

2. Equipped with a linear motion module and a rotary motion module;

3. Equipped with resistance measurement electrodes for easy connection to the electrostatic testing module;

4. The spacing of the fixture is adjustable, suitable for samples of different sizes;

5. Tensile stroke: 200mm;

6. Tensile displacement resolution: 400 nanometers;

7. Tensile speed range: 0.01-500mm/min, continuously adjustable;

8. Maximum vibration frequency: 8Hz;

9. Maximum force: 8kg and 20kg options available;

10. Force resolution: For 8kg, it is 1/400,000 of the full scale, with a minimum resolution of 0.02g; for 20kg, it is 1/200,000 of the full scale, with a minimum resolution of 0.1g;

11. Torsion speed range: 0.1-10 rpm, continuously adjustable;

12. Resistance testing range: 0.01Ω-200MΩ;

13. Resistance resolution: 0.01Ω;

14. Maximum data acquisition frequency: 100Hz;

15. Main unit structure: Horizontal structure, convenient for sample loading;

16. Main unit dimensions: Approx. 700mm*450mm*400mm;

17. Power supply voltage: 220V 50Hz;

18. Equipped with multifunctional software for instrument control and data acquisition, capable of simultaneously collecting displacement, force, and resistance data to generate plots; multiple measurement modes can be configured: such as cyclic stretching, unidirectional stretching, cyclic torsion, unidirectional torsion, cyclic bending, unidirectional bending, cyclic folding, rotary friction, time response, force step, displacement step, etc.;

19. Equipped with a pressure plate, used for testing the repeated compression, rotational friction, etc., of film materials;

20. Equipped with a folding module, used for testing the repeated folding performance of flexible materials;

21. The software can synchronously collect data from multiple brands of meters, such as GSI source meters 2400, 2450, UNI-T source meters S3012H, Tonghui LCR meters TH2840, etc., and can synchronously collect data such as resistance, capacitance, and inductance.

22. Applicable test standard: FZ/T 50065-2025 (Test method for coefficient of resistance elongation sensitivity of conductive filament in chemical fibers)